9040-Hunter HTE-102A HDMI 1.4v 1×2 splitter, HDMI1.4, HDCP 1.2 and DVI 1.0, HDMI audio rate up to 192 kHz, Optical S/PDIF audio rate up to 192 kHz, TMDS clock frequency rate 300 MHz,
LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio, EDID control, Supports 4K×2K resolution and 3D, Single Link Range up to 4K@30HZ.
Hunter 9040 HDMI Splitter 1×2-Supports HDMI1.4, HDCP 1.2 and DVI 1.0 with built-in EDID control, 4K×2K resolution and 3D signal
9040-Hunter HTE-102A HDMI 1.4v 1×2 splitter, HDMI1.4, HDCP 1.2 and DVI 1.0, HDMI audio rate up to 192 kHz, Optical S/PDIF audio rate up to 192 kHz, TMDS clock frequency rate 300 MHz, LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio, EDID control, Supports 4K×2K resolution and 3D, Single Link Range up to 4K@30HZ.
₹2,150.00 Excluding GST
Comparebrands | Hunter |
---|
Based on 0 reviews
Be the first to review “Hunter 9040 HDMI Splitter 1×2-Supports HDMI1.4, HDCP 1.2 and DVI 1.0 with built-in EDID control, 4K×2K resolution and 3D signal”
Vendor Information
- Store Name: mychoice
- Vendor: mychoice
-
Address:
80, Lavanya Apartments
Ground Floor, 13th Cross
Ganganagar, Behind Coffee day 560032
bangalore - No ratings found yet!
-
Wireless Routers
AM-5AC21-60 – Ubiquiti Airmax 21dBi 60deg Ac Sector Antenna
AirMAX ac 2×2 BaseStation Sector Antenna. The airMAX AC Sector Antennas feature significant advances in scalability, noise isolation, and beam performance to complement the Rocket 5ac radios in Point‑to‑MultiPoint (PtMP) networks. They are compatible with RocketM5 models; however, optimal performance requires the Rocket5ac. H-VPOL Beamwidth 60 degree (6 db), Gain : 21 dBi.
SKU: AM-5AC21-60 -
-
HDMI Accessories
HDMI 4×1 Quad Multi-Viewer Supports 4 channels HDMI signal Seamless switching, Audio Switching
HDMI AccessoriesHDMI 4×1 Quad Multi-Viewer Supports 4 channels HDMI signal Seamless switching, Audio Switching
- 9036-Hunter HT-QMVS01HD Quad Multi-Viewer HDMI switch, 1080p 60Hz, supports 4×1 HDMI IN, 1 x HDMI Out, Support 4 channels HDMI signal screen segmentation (4 frames can be combined into more than ten modes), supporta 4 channels HDMI signal seamless switching, Audio Switching, IR control and Panel Button Control Support audio output format: PCM2.0.
- HDMI 4×1 Quad Multi-viewer is a high performance with four HD screen segmentation and seamless switching output switch.
- It can be switched via button and IR control.
SKU: 9036-Hunter HTQMVS01HD
You may also like…
-
HDMI Accessories
50M HDMI Extender over single cat5e/6, Supports 3D full HD 1080p
- 9006-Hunter HT-HX11-TX 50M HDMI Extender over single cat5e/6, 3D full HD 1080p L83xW48xH25mm.
- HDMI high definition video signal will use a CAT5E, CAT6 cable to achieve high definition video transmission, the transmission of video resolutions up to 1080p @60Hz.
SKU: 9006-Hunter HT-HX11- TX 50M -
HDMI Accessories
Hunter-9041 HDMI Splitter 1×4-Supports HDMI1.4, HDCP 1.2 and DVI 1.0 with built-in EDID control, 4K×2K resolution and 3D signal
HDMI AccessoriesHunter-9041 HDMI Splitter 1×4-Supports HDMI1.4, HDCP 1.2 and DVI 1.0 with built-in EDID control, 4K×2K resolution and 3D signal
9041- Hunter HTE-104W HDMI 1.4v 1×4 splitter, HDMI1.4, HDCP 1.2 and DVI 1.0, HDMI audio rate up to 192 kHz, Optical S/PDIF audio sampling rate up to 192 kHz, TMDS clock
frequency rate 300 MHz, LPCM 7.1CH, Dolby TrueHD, and DTSHD Master Audio, built-in EDID control, Supports 4K×2K resolution and 3D signal, Single Link Range up to 4K@30HZ.SKU: 9041- Hunter HTE- 104W
There are no reviews yet.