9020-Hunter HT-HD05S1x2, 1×2 HDMI splitter, HDMI2.0, HDR, 18Gbps, 3D, 4k@60hz YUV 4:4:4, EDID, HDCP2.2 in, HDCP2.2out
Hunter-9020 HDMI Splitter 1×2-Supports 3D 4k@60HZ Full HD with HDR YUV 4:4:4 and HDCP2.2
9020-Hunter HT-HD05S1x2, 1×2 HDMI splitter, HDMI2.0, HDR, 18Gbps, 3D, 4k@60hz YUV 4:4:4, EDID, HDCP2.2 in, HDCP2.2out
₹6,950.00 Excluding GST
Comparebrands | Hunter |
---|
Based on 0 reviews
Be the first to review “Hunter-9020 HDMI Splitter 1×2-Supports 3D 4k@60HZ Full HD with HDR YUV 4:4:4 and HDCP2.2”
Vendor Information
- Store Name: GLOBAL GATEWAY INFRATECH PVT LTD
- Vendor: accounts.blr
-
Address:
#80 ground floor Lavanya Apartment
13th cross Ganga Nagar
behind coffeeday Karnataka - 5.00 rating from 1 review
-
POE Switches
Netgear GS305P-100INS Gigabit Ethernet Unmanaged Switch
- Cost-effective 5-port poe gigabit switch with 55.5w total budget. (W x d x h) – 6.2 x 4.0 x 1.1 inches
- Ideal for small installations of 4 poe devices (ip phone, wired surveillance camera, wireless access point)
- Plug-and-play, simple set up with no software or configuration needed
- Quiet operation, energy efficient and sturdy metal case for anywhere quality installation
- Energy efficient with up to 60 percent lower power consumption
SKU: Netgear GS 305 P -
WiFi access points
TP-Link 2.4GHz 300Mbps 9dBi Outdoor CPE (CPE210)
- Built-in 9dBi 2×2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 27dBm/500mw
- System-level optimizations for more than 5km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
SKU: CPE210 -
Bio-metric Access Controls
MA SIGMA LITE PLUS MULTI STANDARD 500 US (BIA293678660)
- World’s #1 fingerprint technology inside: 1:10,000 user identification in 1 second
- High capacity: 30,000 templates, 250,000 IDs in authorized user list, 1 Million logs
- Anti-fraud features: fake finger detection, duress finger, timed anti-pass back
- Flexibility: MIFARE®/DESFire®/NFC contactless card reader
- Embedded web server
- Tough design: IP65 rated and vandal resistant (IK08)
- Compatible with Morpho and Bioscrypt existing installations
- 2.8″ Touchscreen and buzzer
SKU: BIA293678660
You may also like…
-
HDMI Accessories
Hunter 9040 HDMI Splitter 1×2-Supports HDMI1.4, HDCP 1.2 and DVI 1.0 with built-in EDID control, 4K×2K resolution and 3D signal
HDMI AccessoriesHunter 9040 HDMI Splitter 1×2-Supports HDMI1.4, HDCP 1.2 and DVI 1.0 with built-in EDID control, 4K×2K resolution and 3D signal
9040-Hunter HTE-102A HDMI 1.4v 1×2 splitter, HDMI1.4, HDCP 1.2 and DVI 1.0, HDMI audio rate up to 192 kHz, Optical S/PDIF audio rate up to 192 kHz, TMDS clock frequency rate 300 MHz, LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio, EDID control, Supports 4K×2K resolution and 3D, Single Link Range up to 4K@30HZ.
SKU: 9040-Hunter HTE- 102A -
HDMI Accessories
Hunter-9041 HDMI Splitter 1×4-Supports HDMI1.4, HDCP 1.2 and DVI 1.0 with built-in EDID control, 4K×2K resolution and 3D signal
HDMI AccessoriesHunter-9041 HDMI Splitter 1×4-Supports HDMI1.4, HDCP 1.2 and DVI 1.0 with built-in EDID control, 4K×2K resolution and 3D signal
9041- Hunter HTE-104W HDMI 1.4v 1×4 splitter, HDMI1.4, HDCP 1.2 and DVI 1.0, HDMI audio rate up to 192 kHz, Optical S/PDIF audio sampling rate up to 192 kHz, TMDS clock
frequency rate 300 MHz, LPCM 7.1CH, Dolby TrueHD, and DTSHD Master Audio, built-in EDID control, Supports 4K×2K resolution and 3D signal, Single Link Range up to 4K@30HZ.SKU: 9041- Hunter HTE- 104W -
HDMI Accessories
Hunter-9039 HDMI 2.0 HDR HDMI Splitter 1×4, Ultra HD 4K@60Hz Resolution with HDR and HDCP2.2, Supports Smart EDID control
HDMI AccessoriesHunter-9039 HDMI 2.0 HDR HDMI Splitter 1×4, Ultra HD 4K@60Hz Resolution with HDR and HDCP2.2, Supports Smart EDID control
9039- Hunter HTE-K4 18G HDMI 2.0 Splitter 1X4 Support downscaling With EDID, Compliant with HDMI2.0, HDCP2.2, Support HDR10/Dolby Vision 4K@60Hz 4:4:4, Support 4K/60Hz
to 1080P/Hz downscaling, Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio, Supports smart EDID control.SKU: 9039- Hunter HTEK418G
There are no reviews yet.