Mifare based Smart card Reader (SIASC504)
Door Access Controls
Mifare based Smart card Reader (SIASC504)
- 13.56 MHz based interface that meets ISO 14443A (MIFARE®) standards.
- The ability to read 32 bit MIFARE serial numbers.
- Advanced key management systems to reduce the risk of compromised data or duplicated cards.
- A Wiegand output that easily interfaces with most existing Wiegand protocol access control panels.
- Compact and Elegant. Easily installed on walls and doors.
- A factory configurable bi-color LED bar and multi-tone buzzer that provides distinguishable indicators.
₹1,800.00 Excluding GST
Compare| brands | Smart I |
|---|
Based on 0 reviews
Be the first to review “Mifare based Smart card Reader (SIASC504)”
Vendor Information
- Store Name: GLOBAL GATEWAY INFRATECH PVT LTD
- Vendor: accounts.blr
-
Address:
#80 ground floor Lavanya Apartment
13th cross Ganga Nagar
behind coffeeday Karnataka - 5.00 rating from 1 review
-
HDMI Accessories
Kramer WP-H1M HDMI Passive Wall Plate
HDMI Passive Wall Plate
- Front Panel Connection — 1 HDMI (F).
- Rear Panel Connection — 1 HDMI (F) on a flat, flexible cable.
- Dimensions — 6.9cm x 4.0cm x 11.4cm (2.71″ x 1.57″ x 4.49″) US; 8.6cm x 4.0cm x 8.6cm (3.39″ x 1.57″ x 3.39″) and 8cm x 4.0cm x 8cm (3.15″ x 1.57″ x 3.15″) EU W, D, H.
SKU: WP-H1M -
Analog & IP Cameras
IPC-HFW2230M-AS-LED-B 2MP Lite Full-color Fixed-focal Bullet Network Camera
> 2MP, 1/2.8” CMOS image sensor, low illuminance, high image definition
> Outputs 2MP (1920 × 1080)@25/30 fps
> H.265 codec, high compression rate, ultra-low bit rate
> Built-in LEDs, max LED distance: 25 m
> ROI, SMART H.264/H.265, flexible coding, applicable to various bandwidth and storage environments
> Rotation mode, DWDR, 3D DNR, HLC, BLC, digital watermarking, applicable to various monitoring scenes
> Abnormality detection: Motion detection, video tampering, scene changing, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal access, voltage detection
> Alarm: 2 in, 2 out; audio: 1 in, 1 out; supports max. 128 GB Micro SD card
> 12V DC/PoE power support; 12V DC power output, max. current 165mA
> IP67 protection
SKU: DH-IPC-HFW2230MP-AS-LED-B -
WiFi access points
Aruba Instant On AP12 Access Point R2X01A
- The Aruba Instant On AP12 dual-radio access point supports IEEE802.11ac Wave 2, delivering high performance WLAN, and are equipped with two radios, which provide network access and monitor the network simultaneously.
- Multiple-in, Multiple-out (MIMO) technology allows these access points to deliver high-performance 802.11n 2.4 GHz and 802.11ac 5 GHz functionality with 3×3 MU-MIMO, and are equipped with two radios, which provide network access and monitor the network simultaneously.
- Multiple-in, Multiple-out (MIMO) technology allows these access points to deliver high-performance 802.11n 2.4 GHz and 802.11ac 5 GHz functionality.
- The AP12 access point is designed for ceiling and wall mount. Package Contents: 1 x AP12 access point; 1 x Ceiling mount bracket (suspended ceiling rail); 1 x Wall/ceiling mount bracket
(solid surface) and 1 x Ethernet cable.
SKU: R2X01A -
WiFi access points
TP-Link 2.4GHz 300Mbps 9dBi Outdoor CPE (CPE210)
- Built-in 9dBi 2×2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 27dBm/500mw
- System-level optimizations for more than 5km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
SKU: CPE210 -
Network Components, POE Switches
TP-Link PoE Injector | PoE Adapter 24V DC Passive PoE | Gigabit Ports | Up to 100 Meters(325 feet) | Wall Mountable Design | Plug and Play (TL-PoE2412G)
Network Components, POE SwitchesTP-Link PoE Injector | PoE Adapter 24V DC Passive PoE | Gigabit Ports | Up to 100 Meters(325 feet) | Wall Mountable Design | Plug and Play (TL-PoE2412G)
Use the passive PoE adapter TL-POE2412G to simultaneously supply power and transmit data to a passive PoE device.
SKU: Tl-POE2412G
You may also like…
-
Door Access Controls
DIN RAIL BASED 4 DOOR 8 READER ACCESS (SIASMNG480)
- The Processor :- Its 32 bit processor makes smartXS NG a much faster and more efficient controller in all its functions than any other controller in its category and, along with the following advantages, much more cost effective too.
- CCTV Integration with Access Events:- Alarm Management Software Module for security audit or to verify/identify tailgating, made effective by Alert based network protocol implemented in smartXS NG.
- Door Interlocking:- smartXS NG has inbuilt configurable door interlocking facility so that if one door is open, some or all of the other three will remain closed. The Logic can be defined by the user on site through the controller Keypad.
- DIN Rail mounting option:- Available in more compact and attractive with standard DIN Rail mounting, besides the conventional panel enclosure
SKU: SIASMNG480 -
Door Access Controls
INDOOR KEYPAD PROX CONTROLLER US GANG BO (ROAACD32)
Main Features:
- Advanced 500-user standalone controller
- Access via proximity card and / or PIN codes
- Compatible with all 26-Bit EM proximity cards or tags
- Two tri-colored LEDs and internal buzzer indicators
- Lock strike and auxiliary relay outputs
- Input for Request to Exit (REX) button
- Internal case tamper detector
- Supplied with an installation kit including a security screw, security screw tool, mounting screws and a mounting template
SKU: ROAACD32
There are no reviews yet.