9020-Hunter HT-HD05S1x2, 1×2 HDMI splitter, HDMI2.0, HDR, 18Gbps, 3D, 4k@60hz YUV 4:4:4, EDID, HDCP2.2 in, HDCP2.2out
Hunter-9020 HDMI Splitter 1×2-Supports 3D 4k@60HZ Full HD with HDR YUV 4:4:4 and HDCP2.2
9020-Hunter HT-HD05S1x2, 1×2 HDMI splitter, HDMI2.0, HDR, 18Gbps, 3D, 4k@60hz YUV 4:4:4, EDID, HDCP2.2 in, HDCP2.2out
₹6,950.00 Excluding GST
Comparebrands | Hunter |
---|
Based on 0 reviews
Be the first to review “Hunter-9020 HDMI Splitter 1×2-Supports 3D 4k@60HZ Full HD with HDR YUV 4:4:4 and HDCP2.2”
Vendor Information
- Store Name: GLOBAL GATEWAY INFRATECH PVT LTD
- Vendor: accounts.blr
-
Address:
#80 ground floor Lavanya Apartment
13th cross Ganga Nagar
behind coffeeday Karnataka - 5.00 rating from 1 review
-
-
Proximity Cards
Omni Class R10 Reader (HWAOM30BHOND)
OmniClass™ from Honeywell is a range of 13.56 MHz contactless secure smart card readers that offers superb reliability, consistent read range and ease of installation. They are available in several sizes and each OmniClass reader incorporates smart card technology allowing the user to support biometric profiles and multiple applications on each card simultaneously.
OmniClass can retro-fit any Wiegand output reader, including standard HID® or Honeywell proximity readers.
Smart card technology is ideally suited for access control, logical (PC) access, storage of biometric templates, parking, secure ID’s with embedded tamper-proof digital photos, ePurse and many other applications requiring secure and reliable read/write cards
SKU: HWAOM30BHOND -
Manageable Switches
Netgear JGS516PE Gigabit Rackmount Smart Managed Plus Switch
- Simple setup – setup and configure with easy-to-use web-browser based interface
- Power-over-ethernet – 16-port gigabit ethernet switch with 8 poe ports (802.3af) providing up to 15w per port with 85w total poe power budget
- Essential networking – segment and prioritize your traffic with vlan, qos, igmp snooping, rate limiting and traffic monitoring
- Easy-monitoring – monitor your network status and your cabling with the port statistics and cable health
- Flexible placement – desktop / 1u rack mountable form factor. Jumbo frame support
- Prosafe lifetime protection – lifetime limited hardware warranty, next business day replacement and 24/7 chat with a netgear expert
- 16 gigabit ethernet ports deliver up to 2000 mbps of dedicated, non-blocking bandwidth per port
SKU: Netgear JGS516PE -
Analog & IP Cameras
IPC-HDBW1431E-S4 4MP Entry IR Fixed-focal Dome Netwok Camera
> 4MP, 1/3” CMOS image sensor, low illuminance, high image definition
> Outputs 4MP (2560 × 1440) @25/30 fps, and supports max. 4MP (2688 × 1520) @20 fps
> H.265 codec, high compression rate, ultra-low bit rate
> Built-in IR LED, max. IR distance: 30 m
> ROI, SMART H.264/H.265, flexible coding, applicable to various bandwidth and storage environments
> Image Rotation, WDR, 3D DNR, HLC, BLC, digital watermarking, applicable to various monitoring scenes
> Abnormality detection: Motion detection, video tampering, network disconnection, IP conflict, illegal access, voltage detection
> 12V DC/PoE power support
> IP67, IK10 protectionSKU: DH-IPC-HDBW4231EP-AS-S4
You may also like…
-
HDMI Accessories
Hunter 9040 HDMI Splitter 1×2-Supports HDMI1.4, HDCP 1.2 and DVI 1.0 with built-in EDID control, 4K×2K resolution and 3D signal
HDMI AccessoriesHunter 9040 HDMI Splitter 1×2-Supports HDMI1.4, HDCP 1.2 and DVI 1.0 with built-in EDID control, 4K×2K resolution and 3D signal
9040-Hunter HTE-102A HDMI 1.4v 1×2 splitter, HDMI1.4, HDCP 1.2 and DVI 1.0, HDMI audio rate up to 192 kHz, Optical S/PDIF audio rate up to 192 kHz, TMDS clock frequency rate 300 MHz, LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio, EDID control, Supports 4K×2K resolution and 3D, Single Link Range up to 4K@30HZ.
SKU: 9040-Hunter HTE- 102A -
HDMI Accessories
Hunter-9041 HDMI Splitter 1×4-Supports HDMI1.4, HDCP 1.2 and DVI 1.0 with built-in EDID control, 4K×2K resolution and 3D signal
HDMI AccessoriesHunter-9041 HDMI Splitter 1×4-Supports HDMI1.4, HDCP 1.2 and DVI 1.0 with built-in EDID control, 4K×2K resolution and 3D signal
9041- Hunter HTE-104W HDMI 1.4v 1×4 splitter, HDMI1.4, HDCP 1.2 and DVI 1.0, HDMI audio rate up to 192 kHz, Optical S/PDIF audio sampling rate up to 192 kHz, TMDS clock
frequency rate 300 MHz, LPCM 7.1CH, Dolby TrueHD, and DTSHD Master Audio, built-in EDID control, Supports 4K×2K resolution and 3D signal, Single Link Range up to 4K@30HZ.SKU: 9041- Hunter HTE- 104W -
HDMI Accessories
Hunter-9039 HDMI 2.0 HDR HDMI Splitter 1×4, Ultra HD 4K@60Hz Resolution with HDR and HDCP2.2, Supports Smart EDID control
HDMI AccessoriesHunter-9039 HDMI 2.0 HDR HDMI Splitter 1×4, Ultra HD 4K@60Hz Resolution with HDR and HDCP2.2, Supports Smart EDID control
9039- Hunter HTE-K4 18G HDMI 2.0 Splitter 1X4 Support downscaling With EDID, Compliant with HDMI2.0, HDCP2.2, Support HDR10/Dolby Vision 4K@60Hz 4:4:4, Support 4K/60Hz
to 1080P/Hz downscaling, Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio, Supports smart EDID control.SKU: 9039- Hunter HTEK418G
There are no reviews yet.